SHORE

What is a Class 2 building in NSW?

A Class 2 building is an apartment building under the National Construction Code: a building with two or more sole occupancy units, each of them a separate dwelling. In NSW the class matters because it decides which volume of the code mainly applies and who may build it, since the builder must be registered as a building practitioner.

Last reviewed

What makes a building Class 2

The National Construction Code (NCC) classifies each building or part of a building by the purpose it is designed, built or adapted to be used for. In its guide to building classifications the Australian Building Codes Board (ABCB) describes Class 2 buildings as apartment buildings, where people typically live above and below each other.

A sole occupancy unit is the part of a building that an owner, lessee or tenant occupies to the exclusion of any other owner, lessee or tenant. In an apartment building each apartment is one of those units.

How Class 2 differs from Class 1 and Class 3

Class 1 buildings are houses. Class 1 homes can be attached side by side, as duplexes, terraces and townhouses often are, as long as a wall with fire resisting and sound insulating properties separates them. A Class 1 home cannot sit above or below another dwelling or another class of building, other than a private garage. Homes stacked one over the other therefore cannot be Class 1 and the code places the building in Class 2 or Class 3 depending on how it is used.

Class 3 is a different kind of residential building, giving long term or transient accommodation to a number of unrelated people. The ABCB's examples include boarding houses, guest houses, hostels and backpackers, other than the small guest houses and boarding houses the code keeps in Class 1.

Shared basements and mixed use buildings

The class can surprise owners on smaller sites. The ABCB notes that single storey attached dwellings with a common space below may be Class 2, giving the example of two dwellings above a common basement or carpark. That catches some dual occupancy plans: if the two homes sit over a shared basement or carpark and the building is Class 2, the registered builder and declared design rules that come with that class apply to the pair.

A building can also hold more than one class. The ABCB's example is a building with a carpark in the basement and shops on the ground floor, with apartments and offices on the floors above.

What a Class 2 building asks of your builder

Apartment buildings are mostly covered by Volume One of the NCC, while houses mostly follow Volume Two. In NSW the class also decides who may build, since the builder of a Class 2 building must be registered as a building practitioner under the Design and Building Practitioners Act.

We build Class 2 buildings as boutique apartment builders in Sydney, including ALOFT in Darling Point.

Tell us about your site and the building you have in mind and we can work through what its class will mean for the build.

Your next step

Explore apartments 
All building questions
AboutProjects