SHORE

What does the Design and Building Practitioners Act mean for an apartment build in NSW?

For the owner or developer of an apartment building in NSW, the Design and Building Practitioners Act 2020 means registered designers declare the designs before work starts. The builder must be registered too and makes its building compliance declaration on the work before the occupation certificate is applied for. Those who carry out the work also owe a duty of care to every owner, including later buyers.

Last reviewed

What does the Design and Building Practitioners Act apply to?

The registration and declaration scheme in the Design and Building Practitioners Act 2020 applies to apartment buildings, which the code calls Class 2 buildings. It has applied to them since 1 July 2021. Under the Regulation a building is covered when any part of it falls into a regulated class, so a mixed use building with apartments over shops is covered too. Freestanding houses and side by side duplexes are usually Class 1 homes and sit outside it unless the pair sits over a shared basement or carpark, which can make the building Class 2.

Since 3 July 2023 the scheme has also covered certain new Class 3 buildings such as boarding houses and hostels, along with new Class 9c aged care buildings, as Building Commission NSW lists them.

On an apartment build the documents follow this sequence:

  • Before work starts, the builder obtains the regulated designs and their design compliance declarations from registered design practitioners and lodges them on the NSW Planning Portal.
  • If a building element changes, the builder obtains the new designs and declarations before that work starts and lodges them no later than one day after it starts.
  • Before anyone applies for the occupation certificate, the builder lodges its building compliance declaration and the as-built designs on the NSW Planning Portal.

So ask your builder for its building practitioner registration before you sign. Then ask to see the lodged designs and declarations before work starts and the building compliance declaration before the occupation certificate is applied for.

What has to be declared?

The designs that need declaring are those for a building's elements and for any performance solution, which is a design shown to meet the code's performance requirements by its own route rather than the standard provisions. The Act lists these building elements:

  • the fire safety systems
  • the waterproofing
  • the load-bearing parts essential to the building's stability, from footings and floors to walls, roofs, columns and beams
  • the building enclosure
  • the mechanical, plumbing and electrical services needed to meet the Building Code of Australia

A registered design practitioner declares each of those designs. The builder's building compliance declaration then covers the work itself and has to set out the steps needed to fix any work that does not comply. Building Commission NSW notes that this final declaration must be made by the building practitioner and cannot be delegated to anyone else on the job.

What is the difference between a builder and a building practitioner?

A building practitioner is the registered person who oversees building work on a building the Act covers. Building Commission NSW explains that anyone overseeing building work on a Class 2 building must register as a building practitioner. That applies even if they already hold a NSW building licence under the Home Building Act 1989. The registration sits on top of the contractor licence rather than replacing it.

Who declares the designs?

Only the person who signs off and declares a design needs to register, not everyone on the design team, according to Building Commission NSW's design practitioner guidance. Under the Act their registration must cover the matters they are declaring.

What is the duty of care under the Act?

The Act gives anyone who carries out construction work a duty to exercise reasonable care to avoid economic loss caused by defects arising from that work. The duty is owed to each owner of the land and to each subsequent owner, whether or not the work was done under a contract with them. Construction work here includes supervising, coordinating and project managing, so the duty reaches the people who direct a build as well as those on the tools. The duty also has its own definitions, separate from the apartment classes the registration scheme covers: for this part of the Act, building work includes residential building work within the meaning of the Home Building Act 1989.

The duty cannot be delegated and it does not replace the statutory warranties, which carry their own periods for how long a builder is responsible for defects in NSW.

We hold building practitioner registration BUP4254556 alongside contractor licence 311594C. On our own apartment buildings we lodge the building compliance declaration and work with the certifier towards the occupation certificate. Tell us where your project is up to and we can show you what has to be lodged next.

Your next step

Explore apartments 
All building questions
AboutProjects